High Precision ER Milling Chuck Set
ER milling chuck saitin babban madaidaicin collet chuck saitin, tarin tarin kayan marmari ne, don haka zasu iya kama nau'ikan girma dabam.Wannan saitin chuck cikakke ne don amfani da injina da sauran injunan madaidaicin.
| Oda No. | Girman Ramin | PCS/SET | |
| inci | mm | ||
| ER16-8 (mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6 a ciki (mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10 a ciki (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12 a ciki (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8 (mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in (mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Zane Bar
| Taper na collet chuck | Zaren zane | |
| R8 | 7/16; 20 UNF | |
| 7:24 30 | M12×1.75 | 1/2 - 13 UNC |
| 7:24 40 | M16×2.0 | 5/8 ~ 11 UNC |
| 7:24 50 | M24×3.0 | 1 ~ 8 UNC |
| MS2 | M10×1.5 | 3/8 ~ 16 UNC |
| MS3 | M12×1.75 | 1/2 - 13 UNC |
| MS4 | M16×2.0 | 5/8 ~ 11 UNC |
| MS5 | M20×2.5 | 3/4 - 10 UNC |
| MS6 | M24×3.0 | 1 ¼ -8 UNC |
Da fatan za a sanar da zaren collet chuck draw bar da ƙayyadaddun tarin tarin (metric ko inch)
Da fatan za a sanar da tsawon madaidaiciyar shank da dia.
Muna farin cikin samar da collets da chucks tare da shank daban-daban da yawa bisa ga buƙatun ku.
