Fine Pole Magnetic Chuck don Surface Srinder

Takaitaccen Bayani:

Babban amfani da halaye na Magnetic Chuck

1. Kyakkyawar soyayya akan fuska shida.Ya shafi injin niƙa, injin EDM da na'urar yankan madaidaiciya.

2. Pole sarari yana da kyau, An rarraba ƙarfin Magnetic daidai.Yana aiki da kyau a kan sirara da ƙananan kayan aikin kayan aiki.Madaidaicin tebur mai aiki baya canzawa yayin maganadisu ko ragewa.

3. Ƙungiyar ta hanyar aiki na musamman, ba tare da yatsa ba, yana hana lalata ta hanyar yanke ruwa, yana kara tsawon rayuwar aiki kuma yana ba da damar yin aiki na tsawon lokaci a cikin yanke ruwa.

Aika mana imel

Cikakken Bayani

Tags samfurin

Kayan aiki Bees yana ba da inganci mai ingancimaganadisus ƙera su bisa ga ma'auni mafi girma kuma ana samun su a cikin mafi yawan masu girma dabam daga hannun jari, Magnetic chucks sune na'urori na zamani waɗanda ke maye gurbin gurɓatattun abubuwa, matsi na inji, da kayan aiki, waɗanda ke haɓaka aikinku yayin sarrafa kayan ferromagnetic.

Magnetic chucks na iya ajiye lokaci mai yawa ta hanyar ƙullawa da ƙaddamar da kayan aikin da aka yi amfani da su, yayin da kuma yin amfani da kayan aiki daga bangarorin 5 ba tare da lalata samfurin ba. Manufar yin amfani da ƙwanƙwasa magnetic don riƙe aikin ya zama sananne a cikin masana'antun masana'antu a fadin duniya.

Kayan aiki don mashin ɗin ana yin su ne a al'ada ta amfani da vises ko kayan aiki, amma kuma za'a iya riƙe babur, simintin gyare-gyare, ko ƙirƙira tare da isasshen ƙarfi don ba da damar niƙa, juyawa, hakowa, ko niƙa.An yi amfani da chucks na Magnetic a aikace-aikacen niƙa, amma yanzu ana amfani da su a cikin shagunan inji.

Oda No.	Girma			Magnetic	Tazara	Nauyi (KG)
	(MM)			Karfi	(IRON+KWANKWASO)	Nauyi (KG)
	L	B	H	120N/CM²	1.5+0.5 KO 1+3
Saukewa: TB-A13-1510	150	100	48			4.5
TB-A13-2010	200	100	48			7.5
Saukewa: TB-A13-1515	150	150	48			8.5
TB-A13-2015	200	150	48			11.3
Saukewa: TB-A13-3015	300	150	48			16.5
TB-A13-3515	350	150	48			19.8
Saukewa: TB-A13-4015	400	150	48			22.6
Saukewa: TB-A13-4515	450	150	50			25.5
Saukewa: TB-A13-4020	400	200	50			31.5
Saukewa: TB-A13-4520	450	200	50			35.5
Saukewa: TB-A13-5025	500	250	50			45
Saukewa: TB-A13-6030	600	300	48			72
Saukewa: TB-A13-7030	700	300	48			85

Fa'idodin Magnetic chucks

Fa'idodin Magnetic chucks sun haɗa da:

Rage saitin.

Ƙara samun dama ga ɓangarorin da yawa na kayan aiki.

Sauƙaƙe riƙon aiki.

Magnetic chucks mai sauƙin aiki

Fa'idodinmu ta hanyar samar da magntic chucks:

* Babban Garanti na Magnetic chucks

* Magnetic chucks tare da farashin gasa

Hanyar amfani
1. Ya kamata a tsaftace kofuna na tsotsa kafin amfani da su don kauce wa karce da ke shafar daidaito.

2. Sanya workpiece a kan tebur mai tsotsa, sa'an nan kuma saka kullun a cikin ramin shaft kuma juya 1800 zuwa ON agogon agogo, sa'an nan kuma tsotse kayan aikin don machining.

3. Yi amfani da yanayin zafi a -400C-500C.Babu ƙwanƙwasawa wajibi ne don hana raguwar maganadisu.

4. idan workpiece da aka gama, saka wrench a cikin shaft rami da kuma juya shi 1800 sau tare da counter agogon hannu zuwa "KASHE", sa'an nan da workpiece za a iya cire.

5. gama fuskar aiki tare da man hana lalata.